ATOMSTACK S20 Pro DIY Laser Engraver CNC Laser Engraving Machine Laser CutterM7
Please note that the package included is according to what you choose. Why can we achieve color engraving on steel surfaces? The steel forms a thin oxide layer on the surface when exposed to heat. This layer interferes with light waves, enhancing some wavelengths and reducing others. The thickness of the film will change some wavelengths of light reflecting off the surface of the steel, thereby changing the color. Compare to other steel surface heating technologies, laser always carries more stable and more focused energy, so the metal oxide layer has a more controllable thickness.
ATOMSTACK S20 PRO is one of the most powerful semiconductor laser engravers, it emits laser with much more energy on a smaller spot, which makes higher temperature on steel surfaces. It would make more than 400 color choices on your steel surfaces.
Q: Why does your engraving machine have two power values? A: The 130W is the machine power.The key to determining the engraving/cutting effect is the output power of 20W of the laser module. And S20 pro laser engraver is double-compressed spot technology that makes the laser spot down to 0.08mm to achieve high-density laser cut & finer engraving. Q: Is it possible to cut or engraver metal? A: Yes, The ultra-fine laser focus area is reduced to 0.080.1mm.
The high-density laser can directly cut or engraver metal. Q: Does the S20 Pro laser engraver support connection to the air assist pump? A: Yes, The S20 Pro is equipped with an upgraded F30 Pro air assist kit.
The air Assist pump can quickly reduce the surface temperature, remove smoke and dust, keep the laser in an efficient and stable working state, and make the engraving and cutting surface cleaner and clearer to achieve better results. Q: Is it possible to engrave cylinders?
A: Yes, the S20 pro laser cutter support working on various cylindrical objects by using an ATOMSTACK R3, R3 Pro laser rotary roller. Screen blank cause the emergency stop button is pressed, turn the emergency stop button clockwise to start the screen, and it can use all functions directly without connecting to the computer. When operating the laser engraving machine, please install the laser protective cover. If it is not installed, you need to wear goggles. Please do not touch the laser emitter with your hand, or it may burn your hand. Please avoid a strong impact on the machine. Children under 14 are not allowed to use this product, and children over 14 need parent supervision. Note: The color might be a little different from the actual product due to color display of different monitors. Please allow 1-3 cm error.We strive to have the best customer service possible!! Sometimes have a little delay due to the weekends or holidays.