CNC GRBL Laser Engraver Machine DIY 100100cm Engraveing Machine Router/Cutter
Please wear the protective glass when you use the laser module. Do not touching the laser light directly in case that hurt the body and skin. Keep children and pets away from the laser module when it working.
The Laser dot could not be adjusted, please make sure the distance between bottom of the laser module and engraving material is 16mm(Use the plastic column to do it). Or it will influence the result.Please connect to the driver board carefully! The Red cord is 12V+, the black cord is GND-, the yellow cord is. Please make sure you know how to connect it, Otherwise it might damage the laser module! Engrave Mode:Photo, Word, Scan, outline, Pixel Laser Engraving. Supported Formats:jpg, bmp, svg, G-code.
Material:Stainless Steel and Acrylic. Control Software System :LaserGRBL/Benbox/Lightburn(Provided free software). Engraving Area:100x100cm / 39.37 x 39.37inch (maximum). Can Engrave:Metal(201 stainless steel, 304 stainless steel, Titanium steel and anodized aluminum), Wood, Plastic, PCB, Paper, Bamboo, Ox Horn, Leather, Sponge Paper, etc.
Can Cut:10mm Plywood, 10mm Corkwood, 3mm MDF board, 5mm Black acrylic board, leather, paper, ect. The engraving/cutting effect is affected by many factors, including engraving material reflectivity, hardness, density, color, laser speed, power, etc. If you have specific engraving needs, please contact customer service. Laser Power: 2.5w/5.5w /15w.Laser Wavelength: 445nm (blue viole). 2.5w/5.5w /15w (2.5w/5.5w is adjustable laser, 15w/30w/40w/80w is fixed foucs laser). Drive mode: External ACC constant current drive.
Cooling Method: Forced air cooling. Shell Material: Aluminum, Surface Anodized. Laser Type: semiconductor blue light. 40W actual output power:6-7W. (Label shows standard output power). 80W actual output power:10-11W.Power Control: PWM/TTL (voltage 0-5V). Cable: 3 pin, Red "+" Black "-" Yellow "PWM". Beam Shape: Dot-shaped fixed focus(It comes with a Focusing column 40mm, then when you make the laser work, please confirm the distance from lens to material is 40mm).
The life span is 20000 hours. Due to the different engraving materials, the smoke produced by engraving will adhere to the lens. To avoid affecting the engraving effect, it is recommended to use a fan.